3 |
P a g e
INSTALLATION
The Ascon Turmion Pro WiFi Transformer (TXF) can be installed either indoors or
outdoors. However, the TXF must be positioned so the electrical terminal
connections are facing downward to the ground to ensure maximum protection of
all electrical terminal connections.
Choose a location for the WiFi TXF to ensure the distance between the WiFi TXF and
the LED pool lights being connected complies with the LED pool lights maximum
power cord length.
Note: Refer to the LED pool lights manufacturer’s specifications.
The Ascon Turmion Pro WiFi Transformer should not be mounted in areas where
chemicals are stored (e.g. acid and chlorine). Also ensure that the WiFi TXF can be
connected to the mains power outlet of the pool area.
Note: This outlet must meet the current applicable local standards at the time of
installation.
Note: Do not use a double adaptor to connect the Ascon Turmion Pro WiFi
Transformer to the mains power as this will overload the system and void warranty.
INSTALLATION INSTRUCTIONS
The Ascon Turmion Pro WiFi Transformer must be mounted at minimum of 500mm
above ground level. Multiple units should be mounted at minimum of 200mm from
each WiFi TXF and a minimum distance of 500mm from any other electrical
equipment or device. Electrical terminal connections should be on the underside of
the unit.
