26
20310997en_ba_a0
Programming your telephone
Twin Mode (present/absent)
If you have a stationary set along with your handset, Twin Mode is an easy way to make
sure you can always be reached.
The recharging contact acknowledges 2 states:
a) Handset in charging base (present)
b) Handset not in charging base (absent)
Based on these states automatic call diversion is executed as soon as the handset is taken
out of the charging base.
After returning the handset to the base, the diversion is automatically switched off.
Activating Twin Mode
In programming mode, keep pressing the M-key
until "Mobile" appears. Press the Foxkey under
"Mobile".
Press the Foxkey under "Prog.", then use the
Foxkey under "
¥
" to scroll to "Twin" and then
confirm with "Ok".
Under "TwinNo:" enter the access number of the
corded terminal that is to be diverted to the
handset. Activate Twin Mode with the Foxkey
under "Ok".
Deactivating Twin Mode
In programming mode, keep pressing the M-key
until "Mobile" appears. Press the Foxkey under
"Mobile".
Press the Foxkey under "Prog.", then use the
Foxkey under "
¥
" to scroll to "No function" and
use the Foxkey under "Ok" to deactivate the
Twin Mode.
Notes
•
If call diversion/call forwarding to secretary, voice mail or your own GSM set, etc. is
intentionally activated on the corded terminal with the handset still in the charging
base, that particular setting takes priority over Twin Mode, i.e. calls will not be
automatically diverted to the handset when you remove it from the charging base.
Twin Mode is reactivated as soon as the call diversion/call forwarding activated on the
corded terminal is reset.
•
Other functions besides Twin Mode can also be set (see "Mobile" programming
instructions)
M
¥
Mobile
Prog.
¥
Ok
Ok
0
7
9
8
4
6
5
1
3
2
Mobile
Prog.
¥
Ok
M
