P/N PM000158A • Rev. 2 • ISS 19JUN2018
3 of 3
3. Press the module firmly against the adapter so that the
module’s bottom fasteners snap closed on the adapter.
Removal
When separating the module from an adapter or spacer, use
a screwdriver with a blade that is approximately 6mm wide.
To remove the module from a backbox or spacer:
1. Insert the screwdriver blade into the slot at the bottom of
the module between the faceplate and the adapter.
Caution:
Do not insert the screwdriver into the bottom
corner of the frame, as this may damage the frame or
module.
2. Gently push the screwdriver blade until the module
releases from the adapter.
3. Remove the module from the adapter.
4. Disconnect RJ-45 connectors.
Specifications
Wire/terminations
Cat 5/5e/6/7, U/UTP
Note:
Cat 6/7 cable will work
electrically but may be too stiff for
some back boxes.
Compatible
electrical boxes
(metal or plastic)
European Union
EU
box (or equivalent)
Single backbox with mounting holes
60mm (2.36in.)
United Kingdom
MK
Honeywell
models (or equivalent)
1-gang: 861ZIC, 866ZIC, 877ZIC
Note:
UK backboxes require single
(NUMP86-HK) or dual (NUMPD86-HK)
mounting plates.
