TD 93066EN
User Manual
Ascom Myco Smartphone
4. Basics
23
14 May 2018 / Ver. K
•
: Open a list of recently used apps. Tap to switch to an app. Remove an app by swiping
left, or right.
App Navigation Bar
1
When working with apps, the app navigation bar is shown in the lower part of the screen. The
buttons provide functionality to navigate in, or switch between apps.
Figure 11. App navigation bar.
•
: Return to the previous screen within an app, or close the app.
•
: Returns to the App view.
•
: Open a list of recently used apps. Tap to switch to an app. Remove an app by swiping
left, or right.
4.10 Battery Level Indication
During a call, only the battery warning beep notifies the user. The battery warning beep cannot
be silenced during a call. When not in call, the beep is silenced by pressing the Volume down
button.
4.11 Charge the Handset Battery
TIP: The handset is delivered with approximately 50% battery charge, and does not need to be
charged before use.
The handset has a rechargeable lithium-ion battery. To charge it, use either a Charging Rack,
or a Micro-USB cable. A Charging Rack (for the handset, or the battery) is recommended for
fastest and most reliable charging.
1.Only available on handsets prior to Ascom Myco 2.
NOTE: The handset's indicated battery level might not always be a reliable measure
of how much charge the battery has left, especially after exchanging
batteries. Connect the handset to a charger to receive a more reliable
measure, see
4.11 Charge the Handset Battery
The
Full battery
icon is displayed in the status bar when the battery is
fully charged.
The
Half battery
icon is displayed in the status bar when the battery has
50% of its charge left.
The
Low battery
icon is displayed in the status bar when the battery has
15%, or less charge left. In addition, the handset vibrates and beeps once,
the LED flashes orange, and the dialog window
Battery low! Charge now!
appears.
The
Empty battery
icon is displayed in the status bar when the battery
has 5%, or less charge left. In addition; the handset vibrates and beeps
once every two minutes, the LED flashes red, and the dialog window
Battery empty! Shutting down!
appears.
