TD 92319GB
2008-11-10/ Ver. D
User Manual
Ascom i75 VoWiFi Handset
33
Delete a Message stored in the Message list
Open the message list by pressing
, or from the menu, see
15.2
Messages
on page 41.
Navigate in the list with
. The selected message is marked. Press “Delete”. The
question
Delete message?
is shown; press “Yes”.
12.3 Messaging between Handsets
Messaging between handsets is a system dependent function.
Messages from one handset to another is done from the menu entry “Messages”. It is also
possible to assign a Soft/Hot key or Service to the “Send message” function.
A Soft/Hot key or a Service can be programmed to send messages either to a predefined
address or to any address in the system. If not predefined, the handset will ask for the
destination address.
An incoming message is immediately displayed and the identity of the sending handset is
shown on a separate row.
12.3.1 Send a Message to another Handset
Press the
Menu
Soft key, mark the
Messages
icon and press “Select”. Mark “Send
message” and press “Select”. Enter the destination address or fetch it from the Local
phonebook by pressing the Soft key with the
Contacts
icon; press “Select”. If the address
is not entered, an error message will be displayed. Enter text and press “Send”.
Sending
will be displayed as a confirmation of the transfer.
12.4 Send a Message to a predefined Destination Address
Refer to
15.5.9
Edit a Hot key
on page 48,
15.5.8
Edit a Soft key
on page 47, or
15.4.2
Create a new Service
on page 44, how to predefine the destination addresses.
Press the Soft key, or press and hold the Hot key, or select the Service. Enter text and press
“Send”.
Sending
will be displayed as a confirmation of the transfer.
12.5 Interactive Messaging
Interactive Messaging (IM) is a function that extends basic messaging. It makes it possible
for a user to access information from a client application in the system, from the handset.
An example can be a customized application that can be accessed from the handset. Data
sent from the handset can be used to initiate the application to send the interactive
message, see
12.7
Send Data from the Handset
on page 34. A list of actions can be
included in the message sent from the application to the handset. The user can then select
one action from the list. The action can be sending a message back to the application,
and/or dialling a specific number etc.
An IM is indicated and viewed the same way as an ordinary message, see 12.2.1, but the
Interactive message
icon is added in front of the message. It is saved along with other
messages in the message list.
Interactive Messaging is a system dependent function.
