ASCOM Ascotel Office 100, Operating Instructions Manual

Page: 153 / 184

20BA265311/B0
15
English
Using the extended-feature functions
Switching off the discreet ringing feature
Press the i-key repeatedly until "Discreet" and
"Reset" appears in the display.
Press the Foxkey under "Reset" and the discreet
ringing feature is switched off.
Parking a call
During a conversation, you may hear a "Call waiting" tone indicating that another
subscriber is trying to call you. If you answer the call, the connection with the first person
you were talking to is put on "Hold". Before you can transfer the second connection, you
must "Park" the connection which is on hold.
Press the Foxkey under "2nd conversation" to re-
establish the connection to the caller on hold.
Press the M-key repeatedly until "Park" appears.
Press the Foxkey under "Park" to park the
current connection.
Press the Foxkey under "2nd conversation" to
switch to the second caller. You can now transfer
the call.
Press the Foxkey under "Take back" to re-
establish the connection with the waiting caller.
Note
Parking requires no channel, unlike a connection on hold where both call channels are
busy. The advantage of this is that you can transfer the "call waiting" party (if necessary).
If [P] apears, a call is already parked.
Brokering
After initiating an enquiry call, you can return to the first caller without ending the
enquiry call connection. Afterwards, you can then switch back and forth between the two
subscribers as many times as you wish (brokering).
Press the Foxkey under "2nd conversation" to
switch to the first caller.
Press the Foxkey under "2nd conversation" to
switch back to the enquiry call subscriber, etc.
(and repeat this as often as desired or necessary).
M
2.–conv Park
2nd–convers.
Take–back
2.–conv
2.–conv
Reset