OPTIONAL ACCESSORIES
(continued)
5.
Run
Decide what day(s) you want to exer
cise the engine-generator set. Read the following di
rections completely before setting run days.
Hold down the SET button and press both the TIME/
DAY and ON TIME buttons simultaneously; a
0
is dis
played.
(If
no run days are desired, release all but
tons.) Next the display will change to 1 (Sunday).
If
that day is desired, release the SET button and
wait
for a dash to appear
before the 1 (-1). Once the dash
appears that day is set. To set more run days in addi
tion to this one, press the SET button while the dash is
there
(you only have
I.S
seconds to do so)
and the next
run day is displayed. If you do not want that day do not
release the SET button. That day will be skipped.
When all run days are entered release all the buttons;
"S:E"
is displayed which means the setting process is
completed.
How To Read The Timer
Display Time*
Press the TIME/DAY button once. A dot in the top left
comer means PM.
Display Day·
Press the TIMEIDAY button twice. The day of the week is
displayed as 1-7 (1 is Sunday).
Display Engine Start Time'
Press the ON TIME button.
Display Engine Stop Time'
Press the OFF TIME button.
Display Run Day(s)
Press the TIMEIDAY and ON/TIME buttons simulta
neously, then release them. The run days are displayed in
sequence.
, The display stays on for 5 seconds or
as long as the button is pressed.
5-3
S I
S2
53
54
S5
S6
S7
exercising timer
Figure 5-7. Optional Accessory 1 1 C.
Trouble-Shooting
If
the contact at CP16 and CP17 does not close during the
set exercise period, the engine generator plant will not be
signaled to run.
If
the contact remains closed beyond the
set period, the plant will continue running. In either case,
Acc. 11 timer is malfunctioning.
The built-in battery may
need to
be
replaced after approximately 3 years.
Note
In the exercise mode total engine running time
consists of timer setting plus retransfer time
setting (Feature 3A) plus cool-down time setting
(Feature 2E). See page 4-1.
Timer Override
To override the timer so that the engine is
exercised, change the timer setting to day
"0"
(step 2 on page 5-2).
www
. ElectricalPartManuals
. com
