Asco 4820, User Manual, Page: 23 / 51

Operation
ASCO Model K875A Outdoor Load Bank
4-1
SECTION IV
OPERATION
*******************************************************
W A R N I N G
DO NOT touch the top exhaust hood/duct or cover panel during
operation. The hood will become hot from the exhausted heat and
will cause a serious burn.
Refer to the SAFETY
CONSIDERATIONS section of this manual.
DO NOT allow objects to enter or block screens.
*******************************************************
C A U T I O N
Never exceed the rated voltage as this will cause the Load Bank to
overheat.
Do not apply DC voltages as the contactors do not have arc blowout
magnets.
*******************************************************
PROCEDURE
1.
Place all switches on the control panel to the OFF position.
2.
Connect the power source to be tested to the Load Bank as described in the
INSTALLATION section.
3.
Place the VOLTAGE SELECT switch to the correct voltage to test the generator (dual
voltage Load Banks only).