1. Set the Supply on Test
Press F2 to set supply
voltage, frequency and
phases automatically
(when supply on test is
connected).
Press F3 to manually
edit supply details.
Use the + and - keys
to set the size of the
supply.
Press F1 to see
total load bank/s
capacity.
Press F2 to find
new load banks
and reset errors.
Press F4
to confirm.
SIGMA Hand-held Quickstart Guide
The Sigma Hand-held provides full three-phase instrumentation
on any ASCO Sigma equipped load banks. This quickstart
guide will help you get the best out of the Sigma Hand-held.
2. Options
Read the load bank manual before
use and take special note of all the
safety warnings. Please view the
manual for load bank / hand-held
connection instructions, error codes
and solutions.
Press F1 to see
total load bank/s
capacity.
Press F3 to
view Options.
Press F1 to
scroll through
Options pages.
Press F3 to
select the option
and + to edit.
Press F4 to
confirm Options.
There are numerous
languages available.
i
Options are saved so
you only need to set
them once.
i
ASCO Power Technologies - Froment Load Banks
Cliffe Road, Easton-on-the-Hill, PE9 3NP, United Kingdom
Tel: +44 1780 480033 Email: [email protected]
© January, 2018. Publication 5069 V2.2
Cyclic auto test
repeats the
auto test until
it is stopped
manually.
i
Ramp down
on reject takes
load off slowly
to prevent
damage to
supply on test.
i
Press F1 to
scroll through
common Preset
electrical
parameters.
i