ASCHER RACING F64-USB, Product Manual

Page: 12 / 15

•
recommended procedure for finding suitable bite point setting
1. enter calibration mode and set bite point to high value, e.g. 80 %
2. pull slave clutch only
3. apply throttle
4. reduce bite point in 1.0 % increments (left joystick) until vehicle starts moving
5. make test starts to fine tune desired bite point setting
6. exit bite point calibration mode
•
recommended procedure for quick race starts
1. pull both clutches (master and slave)
2. apply throttle
3. race start

let master clutch snap (it will take less than 20 ms to reach desired bite point)
4. slowly release slave clutch
5. how to use bite point
12