AON2200C Outdoor Optical Node
Solutions Provider for FTTx, RFoG, and HFC
www.ascentcomtec.com
Page 11 of 14
If users configured the network management responder, need to do the following settings:
Responder IP setup instruction:
Network management directly modify:
1.
Default IP is 192.168.1.168, default gateway is 192.168.1.1, default subnet mask is 255.255.255.0
2.
Connect the computer and responder (can be direct connected), and change the computer IP to
192.168.1.XXX (XXX is any number from 0 to 255 except 168); start upper computer network
management software, then search the device and log in.
3.
Right-click device icon and choose modify the device IP.
4.
Enter new IP address, gateway and subnet mask.
5.
Click modify, then exit, it is done. There will show new IP address and gateway on operational
logbook.
6.
Reboot the responder, the new IP take effect (Click the reboot button in the network
management software or power on again)
