2. Installation
2.1 Demands
of
speaker
location
•
Use the System ZF-3 in closed rooms only. Do not expose the speaker to high
humidity, direct water and direct sunbeam.
•
Take care of a minimum distance of 2 m of the speaker to monitors (TV,
computer) and magnetic devices (audio/video-cassettes, floppy-disks, etc.).
WARNING
There may be a slight permanent imprint in soft floor-material!
2.2 Mounting
WARNING
Don’t try to mount the System ZF-3 alone. The weight of the low-frequency unit is too
much for a single person. You need at least two persons to build up the system.
1. Place the low-frequency unit (3)
carefully at the desired place.
2. Adjust the low-frequency unit (3) for
your specific hearing position.
3. Place the high-frequency module
on top of the low-frequency
module.
The stainless steel bars (2) shall start
and end at the end of the
12 mm rounding of the woofer
edge.
4. Connect the units with your power
amplifier(s). See section 4
Warning
The high frequency module is not fixed or bolt with the low-frequency module.
6
Summary of Contents for ZF-3
Page 1: ...SYSTEM ZF 3 USER S MANUAL...
