Ascaso BARISTA T 1GR, User Manual, Page: 16 / 56

16
ENGLISH
To program the amount of coffee, with the machine on and ready to make coffee (keys
of the keypad permanently lit), press the programming button XL for 5 or 6 seconds
until it is lit intermittently while the rest of the keys are illuminated in a fixed manner.
Then press the key of the selection you want to program, which is lit intermittently at the
same time that the other two keys are off. The erogation process begins.
Once the desired quantity has been obtained, press again the key belonging to the
selection you are programming. The dispensing process is stopped and the 5 keys are
permanently illuminated. The selection is programmed.
If you want to get coffee at will (continuous), press the XL key. When you get the
desired amount, press again to interrupt the delivery.
1 espresso 1 lungo
2 espressos
2 lungo continuous
(press again
to discontinue
the dose)
ATTENTION!
In machines of 2 and 3 groups, when programming the left group, they are au-
tomatically programmed with the same volume parameters located to the right
of this.
ATTENTION!
The BARISTA T PLUS model has a semi-automatic switch that activates the de-
livery of coffee manually.
10 – Programming dose of coffee
MANUAL BARISTA T ENG-ESP_DE-----actualizado marzo2019.indd 16 25/03/2019 15:37:05