All rights reserved. No part of this publication may be reproduced, stored in a database, or transmitted in any form or by any means, electronic,
mechanical, recording, or otherwise, without the prior permission of ASC Group.
4
Assembling instructions
1.
Extend the U bracket from the X-frame and secure it.
2.
Insert the X-frame through the vertical Mobile Tower frame. Place the lower beam (the side of
the bracket) two rungs higher than where the platform will be or already has been placed.
3.
Turn the X-frame until you can properly insert the top beam on the other side of the hook
around the fourth sport above the platform.
4.
Put the upper beam around the sport and pull the hook on the other
side up to the sport.
Use
This manual is an addition to manual of the Mobile Towers. Consult
the correct manual for your product.
The X-frame is intended as a construction aid to prevent
falls. The frame is therefore not designed to reinforce
your scaffolding; preferably remove it after building the
scaffolding. The X-frame can possibly remain seated,
provided that this is clamped between a horizontal brace
and two uprights.
Relocation
You must remove the X-frame before moving the Mobile Tower; it can vibrate and fall.
Chemical products
Avoid contact with acids and chemical products. These can cause corrosion to
the aluminium, which can affect the strength of the aluminium
