1
SP003 Solar Water Pump Kit Instructions
By All Solar Central
www.allsolarcentral.com
Thank you from the entire ASC family for purchasing
an ASC solar product! Please read this entire booklet
before assembly.
Package contents:
1 x Water Pump with 16 ft. Cable
1 x Solar Panel
1 x Solar Panel with Bracket
2 x Extension Tube
1 x Ground Spike
1 x Floating Foam
1 x Set of Fountain Nozzles
Notes:
If there is any damage to the product or missing
parts, please contact us at 1-626-582-8898 or
www.allsolarcentral.com/contactus
Assembly Steps:
1.
Connect the bracket, tubes and spike together.
Then attach the solar panel to the bracket. Slide
the holding bracket into the inside lip of the top
half of the solar panel frame. The bracket holds
the weight of the solar panel. The solar panel can
be adjusted for optimal sunlight by using the
wingnut. Please see the diagram.
2.
Insert the spike into the ground. Position the
solar panel so it’s facing south (in northern
hemisphere) as much as possible to maximize
daylight hours. It is important to angle the solar
panel to face the sun when the sun is at its
highest point. Ensure the solar panel is not
shaded by trees, shrubs or buildings.
3.
Connect the Pump to the back side of the Solar
Panel.
IMPORTANT!!
Slightly twist the connectors
when connecting to make sure the rubber seals
are fully in the grooves.
4.
SOLAR PUMP FUNCTIONS
This pump runs from direct sunlight. The pumps
performance is directly related to the amount
and strength of sunlight received by the solar
panel. This solar pump is designed primarily to
operate in summer months but can also work in
spring and autumn if there is direct sunlight.
Notes: This model
DOES NOT
come with a
battery, so the pump will only work when the
solar panel is in sunlight
.