2
5.
Connect the bracket, tubes and spike together.
Then attach the solar panel to the bracket. Slide
the holding bracket into the inside lip of the top
half of the solar panel frame. The bracket holds
the weight of the solar panel. The solar panel can
be adjusted for optimal sunlight by using the
wingnut. Please see the diagram.
6.
Insert the spike into the ground. Position the
solar panel so it’s facing south (in northern
hemisphere) as much as possible to maximize
daylight hours. It is important to angle the solar
panel to face the sun when the sun is at its
highest point. Ensure the solar panel is not
shaded by trees, shrubs or buildings.
7.
Connect the Pump to the back side of the Solar
Panel.
IMPORTANT!!
Slightly twist the connectors
when connecting to make sure the rubber seals
are fully in the grooves.
Notes:
Your Solar Pump Kit might vary. Please
refer to the Solar Water Pump Kit Instructions for
more information.
8.
Now your new fountain is assembled and ready
to use.
Please visit www.allsolarcentral.com for more
products and offers.