5
asberprofessional.com
asberprofessional.com
2.4.4
PRESSURE REGULATOR CONVERSION
Failure to install the pressure regulator will void the appliance warranty
The fryer needs to be restrained to prevent tipping when installed in order to avoid the
splashing of hot liquid. Install the fryer connection to a battery of appliances or installing the
fryer in an alcove, or by separate means, such as adequate ties
2.5
Location
Installation of the equipment should be performed by qualified, certified, and authorized
personnel who are familiar and experienced with local installation codes.
Before Installation please read instructions completely and carefully.
Do not remove permanently affixed labels, warnings or plates from the product.
Please observe all local and national codes and ordinances
• Installation must conform with local codes, or in the absence of local codes, the National
Fuel Gas Code, ANSI Z223.1 (latest edition)
The appliance must be isolated from gas supply piping system, by closing its individual
manual shut off valve during any pressure testing of the gas supply piping system at test
pressure equal to or less than ½ psi (3.45kpa)
A.
Remove cap and snap out plastic plunger from bottom of cap.
B.
Turn plunger over and snap back in original location.
C.
Re-insert the cap assembly into the regulator and tighten.
