manualshive.com logo in svg

Asante Voyager I, User Manual, Page: 66 / 94

Share
Download
Asante Voyager I User Manual Download Page 66

FTP Login Password: the password to log in the FTP.   

Select Save to complete and activate your settings.

 

3.

 

Notification via HTTP server 

„

 

Basic Setting > Network > Notification of IP Address Change > HTTP Notification 

Server: the address of the server, i.e. http://. 

Port: the port to access HTTP. The default setting is 80 (recommended). 

Parameter: the setting of the parameters, refer to the installation setting of your HTTP 
server. 

Refer to the installation setting of your HTTP server for the setting of the parameters 
(such as Username, Password, and Proxy).

 

Select Save to complete and activate your settings. 
 

 

Notification Setting 

 

Basic Setting >\ Network >\ Multicast 

This function allows multiple people to watch video streaming without limitation on the 
number of users, but is only applicable in the LAN environment. The video streaming format 
(MPEG4/MJPEG) depends on the selected image format setting in Basic Setting 

→

 

Video/Image 

→

 Video Format. 

 

66 

Summary of Contents for Voyager I































































































Reviews:

No comments