manualshive.com logo in svg

Asante IntraSpection Personality Module, User Manual, Page: 78 / 88

Share
Download
Asante IntraSpection Personality Module User Manual Download Page 78

Menus

Page 6-22

VLAN View

This menu allows you to view, configure, and manage the 16 groups of 
VLAN that are supported by the SuperStack II Switch 1000.

Table 6-13 describes each field in the VLAN View menu.

∆

Note:

For instructions on using this menu, see Chapter 5, 

“VLAN.” 

Table 6-13  VLAN View Menu

Field

Description

Group Number/
Port Number

Buttons; represent each of the device’s ports.  

Vlan1 – Vlan 16

Buttons; represent each of the device’s 16 groups of 
VLAN.

Menu Items

Menus; allow you to manage each configured group 
of VLAN (groups that contain at least one port) or the 
entire device. These menus are identical to those on 
the Device Page.

❏

Configuration

❏

VLAN — allows you to name, disable or 

enable the selected VLAN group.  See 
“VLAN” on page 6-3.

❏

Address List — allows you to view the 

last 500 IP addresses that the device 
received and allows you to restrict access 
to each port.  See “Address List” on page 
6-4.

❏

Identify — allows you to configure identi-

fication information for the device.  See 
“Identify” on page 6-6.

❏

Device — allows you to view general 

information on the device.  See “Device” 
on page 6-7.

❏

Agent — allows you to view SNMP agent 

information on the device.  See “Agent” 
on page 6-8.

❏

Slots — allows you to view and configure 

the device’s group information.  See 
“Slots” on page 6-9.

 book  Page 22  Thursday, September 4, 1997  3:47 PM

Summary of Contents for IntraSpection Personality Module

























































































Reviews:

No comments