34
IntraCore IC3624PWR Layer 2 PoE Switch with Dual Gigabit
6.2.3.1 SNMP Management Configuration
The SNMP Configuration screen lists all SNMP managers and associated information. There are two default
community strings, private and public. Read-only is allowed with public mode and read-write is allowed in private
mode. You can change the community strings to meet your network requirements.
Map: Main Menu->Basic Configuration Menu->SNMP Configuration->SNMP Management
Configuration
The following table describes the four commands used to set the Manager IP, Community string, Status and
Privilege.
Set Manager Status:
Enable or disable a community string.
Set Manager Privilege:
Set the access privilege, 1 is Read-only and 2 is Read-Write.
Set Manager IP:
Set the IP address of a specified community. The access is restricted to specified IP
only.
Set Manager Community:
Set community string.
