background image

 

Copyright Notice

 

Copyright 1997 by Asanté Technologies, Inc. 

All rights reserved. No part of this manual, or any associated artwork, software, product design or 
design concept, may be copied, reproduced or stored, in whole or in part, in any form or by any 
means mechanical, electronic, optical, photocopying, recording or otherwise, including transla-
tion to another language or format, without the express written consent of Asanté Technologies, 
Inc.

 

Trademarks

 

Asanté Technologies and FriendlyNet are trademarks of Asanté Technologies, Inc. Ethernet is a 
registered trademark of the Xerox Corporation. A ll brand names and products are trademarks or 
registered trademarks of their respective holders.

 

FCC Information

 

This device complies with part 15 of the FCC Rules.  Operation is subject to the following two 
conditions:  (1) this device may not cause harmful interference and (2) this device must accept 
any interference received, including interference that may cause undesired operation.

Operation of this equipment in a residential area is likely to cause interference, in which case, the 
user, at his or her own risk and expense, will be required to correct the interference.

 

Declaration of Conformity

 

Asanté Technologies, Inc. declares that the FriendlyNet Ethernet Hub conforms with the follow-
ing standards, in accordance with the provisions of the EC Directive 89/336/EEC: EN 
55022:1994, EN50082-1:1992, IEC 801-2, IEC 801-3, IEC801-4:1988.

 

Asanté Warranty

 

Asanté Technologies, Inc. warrants that this product will be free from defects in title, materials 
and manufacturing workmanship.  If the product is found to be defective, then, as your sole rem-
edy and as the manufacturer’s only obligation, Asanté Technologies, Inc. will repair or replace the 
product.  

This warranty is exclusive and is limited to the FriendlyNet Ethernet Hub. This warranty shall not 
apply to products that have been subjected to abuse, misuse, abnormal electrical or environmen-
tal conditions, or any condition other than what can be considered normal use.

 

Warranty Disclaimers

 

Asanté Technologies, Inc. makes no other warranties, express, implied or otherwise, regarding 
the FriendlyNet Hub, and specifically disclaims any warranty for merchantability or fitness for a 
particular purpose.

The exclusion of implied warranties is not permitted in some states and the exclusions specified 
herein may not apply to you.  This warranty provides you with specific legal rights.  There may be 
other rights that you have which vary from state to state.

 

Limitation of Liability

 

The liability of Asanté Technologies, Inc. arising from this warranty and sale shall be limited to a 
refund of the purchase price.  In no event shall Asanté Technologies, Inc. be liable for costs of 
procurement of substitute products or services, or for any lost profits, or for any consequential, 
incidental, direct or indirect damages, however caused and on any theory of liability, arising from 
this warranty and sale.  These limitations shall apply notwithstanding any failure of essential pur-
pose of any limited remedy.

 

book  Page 2  Wednesday, October 15, 1997  12:32 PM

Summary of Contents for FriendlyNET Wireless USB Adapter


















Reviews: