ASAHI PENTAX S3, Service Manual

Page: 33 / 54

G 1
Between (B35) (mirror actuator lever shaft), (B18) (mirror actuator lever,
top) and (B19) (mirror actuator lever, bottom) hole
Contact between (B42) (mirror seat lug stud) and (B83) (mirror checker
spring).
Thin Japanese writing brush.
Between (C24) (bottom main gear) and shaft bearing of (C02) (bottom
mec. plate). Thin Japanese writing brush.
Between groove of (C24) (bottom main gear) and (C58) (take-up spool
spring), (W17) and (C14) (bottom take-up spool brim). "
Between bottom of (C31) (wind-up shaft) brim, (W17) (bakelite), and
(C13) (top take-up spool brim). "
Between (C34) (wind-up lever shaft) and hole and inside bottom of (C20)
(top 1st gear). "
Between (C34) (wind-up lever shaft) and hole of (C35) (wind-up lever
seat).
"
Between (E20) (idling gear shafts and hole of (E19) (idling gear collar). "
(small quantity)
G-2
Contact between (B16) (mirror checker lever) and (B51) (1st dia. lever
pin). "
Contact between (B27) (actuator lever, top) and (E30) (actuator lever rod). "
Contact between (B28) (bottom actuator lever) and (B29) (2nd dia. lever
checker plate). "
Contact between (C15) (coupler lever) and (B19) (mirror actuator lever). "
Between center hole of (C15) (coupler lever) and (C48) (coupler lever
shaft). "
Contact between long hole of (C15) (coupler lever) and (C51) (coupler
lever pin). "
Contact between the tip of (E06B) (bottom bulb lever) and (E44)
(selector
gear retainer ring).
"
(small quantity)
Between projected part of (E68) (speed selector disc) and sliding part of
(E69) (cam shaft) groove.
"
(small quantity)
Between triangular groove of (E69) (cam shaft) and projected part of
(E25) (selector collar).
"
(small quantity)
G 3
Between hole of (C25) (bottom 1st gear) and (C46) (bottom 1st gear
shaft).
"
(small quantity)
Between hole of (C26) (bottom 2nd gear) and (C45) (bottom 2nd gear
shaft).
"
(small quantity)
Contact between (C27) (bottom 3rd gear) and (C63) (sprocket seat
spring).
"
(small quantity)
230-2 -33
-