ASA Electronics oyage AOM703 Owner'S Manual Download Page 7

5. Use the template provided on page 10 for proper placement of the junction box 

mounting holes. Use the #8 self-drilling screws (included) to secure the junction 
box in the desired location. The junction box can also be mounted using the 2”x 4” 
velcro strip (included).

6. There are 2 options for connecting the LCD monitor to the junction box. If the 

application is such that the monitor is in close proximity to the junction box, the 
AOM703 monitor can be connected directly to the junction box. If the junction box 
is mounted further from the monitor, use the 5’ intermediate cable included with the 
AOM703 to connect the monitor to the junction box. If more cable length is needed, 
additional 5’ lengths of the intermediate cable can be purchased. (See the accessory 
list at the back of this manual for part number details.)

7. Connect the 6-pin power harness to vehicle. (See system connection illustration 

page 8)

8. Plug camera extension cable (available separately) into AV1, AV2 or AV3 input

connector on the junction box. Plug observation camera into camera 
extension cable.

9. Make sure all cables are routed away from hot or moving parts, and away from 

sharp edges. Secure cables with wire ties.

10. For rear observation applications, range marker stickers have been included with 

this product. These markers are designed to adhere to your LCD monitor and 
provide a reference for gauging distance. See page 9 for illustration showing 
proper use and installation of the range markers

7

Summary of Contents for oyage AOM703














Reviews: