Pa
irin
g a
n A
nd
ro
id or i
SO D
ev
ice
Pr
og
ra
mmin
g F
lo
or
pla
n on D
ev
ice
QRGINCOMMAND1116
MA-1612001A-1R
For owner’s manual and software updates please visit
http://www.asaelectronics.com/incommand.
For update instructions, please refer to Software Update section starting on page 22 in the owner’s manual.
For further assistance, please call
877-845-8750
.
Patent # (D776,068)
Patent # (D762,644)
MODEL NUMBER: JRVCS1
©Copyright 2016 ASA Electronics, LLC
NOTE: Some features may not be available depending on installed factory options.
Start
Prime
032.3 hrs
13.6 VDC
Awning 1
Kitchen Slide
Master Bed Slide
Sofa Slide
In
In
In
In
Out
Out
Out
Out
Water Pump
Water Heater
Interior Lights
Exterior Lights
Security Lights
Menu
On the DC, scroll to the bottom of the list of functions and select the MENU
button, then select the Bluetooth button.
Yes
Yes
Yes
Yes
Yes
No
Fuel Station
Master Bed Slide
Sofa Slide
Generator
Menu
Menu
Yes
Awning 1
Yes
Awning 2
Yes
Hydraulic Slide Room
Setup
Info
Brightness
Reset
Passcode
Bluetooth
Status
ANDROID devices
On the DC, select “DISCOVER”, then
select “ALLOW”. “Discover” will turn into
“End” and start counting down. The
iN•Command® ID will appear in “Unpaired
Devices” on the device. Select the correct
ID. The PAIRING REQUEST screen will show
on the DC and device. Select “Pair” on both.
iOS devices
In the Bluetooth Screen on the DC, select Scan. On the iOS Device, go
to Settings, then Bluetooth, and turn it on. The iOS Device will appear
on Unpaired Devices list. Select it. The Pairing Request screen will
appear on the DC and Device. Select “Pair” or “OK” on both. On the
iOS Device, ensure the DC is Connected. If not, press “Not Connected”
next to the DC ID and it should connect.
(Procedure is same for both iOS
and Android devices)
On the device, select the “MENU” button. In MENU, select the “RESET” button; select
“FLOOR PLAN”. The button layout should now reflect the floor plan of the RV.
iN•Command® is able to pair to Android and iOS devices using the iN•Command® App. Visit the Google Play and Apple stores on your mobile device to check compatibility
of your device. The first time the App is opened, the EULA screen will apper. Scroll through the EULA screen and press Accept. Then enter a New Passcode.