DDM200 user manual - hardware
Created by: MPuchner 01.2020
version: 9600024A
Original user manual
page 59 of 66
printed: 25.02.2020
Telescope wiring
You can lay cables through the RA axis of the mount. Therefor insert the cables through the cable inlet. You can
fix the cables at the cable holders on the DE axis.
Consider that there needs to be some additional cable length so that the DE axis can move
without interference! Test your setup by moving the axes manually along their whole range of
movement and watch the cables. There must not be any tension on the cables at any time!
ASA is not liable for any damage or injury caused by subsequent wiring performed by the
customer.
Figure 74 - cable lead-through
