English
User Manual - M0022
- To start the test, press the encoder knob;
- Follow the indications on the display and wait for the completion of the test;
- Analyze the displayed test results;
- To exit to the start screen and subsequent tests, press the encoder knob again.
7. SAFETY REGULATIONS WHILE WORKING WITH M0022
To avoid possible electric shock or personal injury, and to avoid damage of 2 or tested equipment,
strictly follow these rules:
- Ensure that the measuring clamps are not damaged in insulation or in exposed metal. Check for
openings in the clamps. If damage is found, replace them before using the device.
- In order to avoid electric shock and damage of the device, do not apply any voltage to the device
outputs (or between the ground and any of the outputs), only the solenoid can be connected to the
device.
- When taking measurements, try to connect the outputs correctly.
- Do not store or use the device in places with high temperature, humidity, danger of explosion or
fire, strong magnetic field. As a result of exposure to dampness, the performance of the device
may take a turn for the worse.
- In order to avoid damage or failure of the device, it is not allowed to make changes to the
electrical circuit of the device. In the case of a malfunction, contact the manufacturer or sales
representative.
- To clean the surface of the device during servicing, use a soft cloth and spray to clean the
monitor screens. To avoid corrosion, malfunction or damage to the appliance, abrasives and
solvents must not be used.
- The device is intended for indoor use.
11
