19
Preparations
Prior to all maintenance and cleaning work:
1. Let the device cool down for at least
20 minutes.
2. Pull off the two spark plug connectors.
3. Close the fuel valve and the tank ventila-
tion.
4. For work on the bottom of the device, tilt
the device backwards until the engine sup-
port rests on the ground.
Cleaning the device
After each use, you should clean the device
thoroughly, especially the bottom side and the
blade.
Stuck grass or dirt affect the grass discharge
and the cutting quality. For a sufficient engine
cooling, keep the engine cover, ventilation grid,
and the engine clean.
Fire hazard!
Pay special attention so that
components at the silencer are clean.
For cleaning use a hand brush. Remove stub-
born soiling with a wooden or plastic spatula.
Clean the outer housing parts with a cloth.
Do not rinse off the device with a water jet or
high pressure cleaner! Do not use aggressive
cleaning agents.
General inspection
To ensure proper working order of the device,
regularly check all nuts, bolts, screws, fuel line
connections, air filters, etc. for firm seating.
Check the ignition cable and the spark plug
connectors for damages.
Change the damaged or used parts especially
covers, protection skirt, silencer, or fuel imme-
diately (authorised service centre).
Chain lubrication
The chains on the right and left of the differen-
tial lock must be lubricated on a regular basis.
We recommend the use of biodegradable
chain spray.
Transmission
The transmission is maintenance-free and
filled with oil that is supposed to last the entire
service life of the device. Make sure that there
are no leaks or damages.
Maintaining the engine
Danger!
If the speed of rotation is set too
high, objects can be ejected. The
engine can be damaged and noise
pollution increases.
Do not change the basic setting of
the carburetor or the speed control.
The operating instructions of the engine are
prepared by the engine manufacturer. They
contain the maintenance instructions and the
warranty conditions for the engine. If warranty
work for the engine is required, please contact
your authorised service centre or the nearest
authorised engine dealer.
To ensure a long service life of the engine,
sufficient engine cooling is required.
Keep the
- engine cover (ventilation grid),
- silencer (protective grid) and
