AS MOTOR AS 565KM, Instructions For Use Manual, Page: 7 / 20

AS 565KM
1.3 Basic information
1.3.1 Authorised machine use
AS 565KM brush cutter is designed and manufactured according to the most current knowledge in the field of small garden and agricultural
machinery. It is characterised by its easy handling, quiet, efficient and economy Briggs & Stratton engine, as well as by trouble-free maintenance..
This brush cutter is designed for cutting high-grown thin-bladed grass stands and smaller branches
9
in fields, forests and meadows on maintained
areas 10 maximum height of these is 60 cm. Na plochách nesmí být pevné předměty v porostu a větší terénní nerovnosti. Sekačka není určena pro parkovou
úpravu travních porostů.
The use of this machine for purposes other than those it was designed for is then considered as unauthorised use!
The machine can work at all the tilted positions described by the engine manufacturer provided that the attendant is able to lead it safely for both him
and his surroundings.
Protective devices meet the requirements of EN 12733 standard. This standard focuses primarily on the attending persons’ safety, as they can be hit by
stones and other subjects flying from the machine rotary system. Therefore, the attending person must always be in normal operating position, i.e. behind
the machine, holding the handlebars firmly with both hands.

It is forbidden to remove any protective devices and covers from the machines.
1.3.1.1 Technical information
AS 565KM Unit Value
Length x width (including the side screen) x height mm 1730 x 763 x 1180
Weight kg 64
Maximum cutting width cm 58,5
Safe climbing ability

10°
Cutting disk revolutions 11 min -1 1990
Maximum blade circumferential velocity m.s -1 60,9
Travelling speed km.h -1 2,0
Area capacity 12 m 2 .h -1 max. 1170
Gearbox oil capacity l (litre) 0,025
Gearbox oil quality API / SAE GL-4 (GL-5) / 90 (80W-90)
Tab. 3: Technical information for AS 565KM
1.3.1.2 Engine information
Engine Unit Value
Type - B&S 850 Series TM 13
Engine displacement cm 3 190
Bore x stroke mm 68,3 x 51,8
Max. power/at rpm (HP) 14 kW/min -1 (HP) 3,6/3200 (4,9)
Max. torque/at rpm 15 N.m/min -1 11,5/2600
Maximum (set) engine rpm min -1 3200 ± 100
Fuel consumption l (litre) 1,7 at 3060 min -1
Maximum engine tilt (long period)  15°
Maximum engine tilt (short period 16 )

30°
Fuel tank volume 17 l (litre) 1,13
Fuel (unleaded) petrol ON 91-95
Engine oil filling l (litre) 0,6
Oil quality SAE SAE 30 or10W-30
Ignition plug - CHAMPION QC12YC
Tab. 4: Engine technical information
9 The brush cutter is not designed for cutting self-seeding wood and branches thicker than 5 mm! Not following this condition leads to machine damage.
10 The stands in the area is cut and raked up at least once a year!
11 Actual rpm. of the disc when not cutting, including belt transmission losses.
12 Square meters cut per min./hour will vary, depending on the type of the stand.
13 More information on the engine including spare part numbers can be found at www.briggsandstratton.com.
14 Measured according to new Society of Automotive Engineers (SAE) J1349 standard.
15 Measured according to new Society of Automotive Engineers (SAE) J1349 standard.
16 Short period – up to 1 minute.
17 Measured according to new Society of Automotive Engineers (SAE) J1349 standard.
7