19
Adjust seat springing (if existing)
The seat suspension should be adjusted to the
driver’s weight and the terrain features. You
will sit most comfortably when the spring travel
is fully made use of.
The seat suspension should be set as soft as
possible to keep it from going coil-bound dur-
ing normal operation. You can read the current
setting from the scale on the seat.
If the seat goes coil-bound during normal oper-
ation, turn the handwheel clockwise. The indic-
ator moves towards 5. The seat suspension
becomes stiffer.
If the seat suspension is stiff during normal op-
eration and thus uncomfortable, turn the hand-
wheel anticlockwise. The indicator moves to-
wards 1. The seat suspension becomes softer.
Guide values for driver’s weight for flat terrain:
kg
Scale
50
≥ 2
90
≥ 3
130
≥ 4
Flip up bar (if existing)
For safety reasons, always use the device with
the bar folded up and locked. If the device tips
over, the bar can prevent the device from over-
turning. Serious damage to the device can be
thus avoided.
The device may only be used with the bar fol-
ded down on level ground.
Transport rack (if existing)
Warning
During the loading process, there is an in-
creased risk of tilting.
► Do not drive up or down steep slopes
when the transport rack is loaded. Ob-
serve the permissible loading limits.
The device has a transport rack above the en-
gine cover.
Caution!
Only load the transport rack so that
the ventilation grid that is located below it is not
covered. Otherwise there is a danger that the
engine overheats and is damaged.
Loading limits
Maximum load:
5 kg
Maximum height:
23 cm
Maximum width:
60 cm
Maximum length:
42 cm
Summary of Contents for 021917080011
Page 47: ...47...
