24
Switching off and parking
Warning!
Risk of injury in case of unauthor-
ised use.
Always remove the ignition key
when you do not use the device.
1. Move the drive lever slowly to neutral posi-
tion.
2. Turn the accelerator lever to idle speed.
3. Switch off the blade clutch.
4. Move the lever for the cutting height adjust-
ment to transport position.
5. Actuate the parking brake.
6. Turn the ignition key to “ignition off”.
7. Wait until the engine comes to a standstill
before you step away from the device.
8. Remove the ignition key.
9. Close the fuel valve.
10. Close the tank ventilation.
Maintenance
Warning!
Risk of injury due to unexpected
movement. When inspections are
carried out, the device can move un-
expectedly.
Make sure that no persons or ob-
jects are in the danger area of the
blade.
Make sure that no further hazards
result from an unexpected move-
ment.
Warning!
Risk of injury during maintenance
and cleaning work when the engine
is running.
Perform maintenance tasks only
then with a running engine if this is
required in the Maintenance table.
Prior to all maintenance and cleaning work
when the engine is not running:
1.
Let the device cool down for at least 20
minutes.
2.
Close the fuel valve and the tank ventila-
tion.
3.
Disconnect the negative pole of the bat-
tery.
Improper maintenance can make the device
unsafe for operation and result in accidents.
Regular maintenance keeps you device ready
for use.
Service the device according to the following
maintenance instructions.
Contact an authorised service centre if prob-
lems during maintenance occur or if you de-
termine deficiencies during one of the following
inspections.
