15
ARZUM
speed to start the fan and select the fan speed level (1-Low, 2-Medium,
3-High).
• Set the time by rotating the timer knob clockwise to select a desired
timing level, the range is between 0-120 minutes
• To stop the fan, just press the button “0”.
• To completely shut the fan off, turn all the controls to OFF, and remove
plug from the socket-outlet.
Oscillation:
• If you want to enlarge blast area in your room, press the swing button
down, the fan will oscillate and blast your room in large scope. To stop
oscillating, just pull out the swing button.
Setting Airflow Angle:
• Moving the fan head either up or down can make further wind
direction enhancements.
Adjusting the Height
• Do turn off the fan before lift or lower its height.
• To lift or lower the height of the fan, loose the bracelet and lift or lower
the lift pole to your desired height, then fasten bracelet tightly.
CLEANING AND MAINTENANCE
• Make sure whether your ventilator operates or not and the plug is
disconnected from the outlet before starting the cleaning.
• Wipe the exterior surface of your appliance with a damp cloth and dry
it properly before usıng the appliance
•
NEVER
use the hard and abrasive deaning materials.
•
NEVER
plunge your appliance into water or any other liquid.
• Consult
Arzum Authorized Services
in case it is necessary to repair
or replace the electric cord.
ATTENTION: When grills and fan blade cleaning is necessary, you
should disassamble them first.
EN
