13
ARZUM
to get inside. Do not use chemical cleaning
agents.
• Do not store your scale in highly humid
places, do not put it in water or other liquids.
• Do not store your device in an upright position when you are not
using it.
• Do not drop your scale and do not jump on it.
• In case of an issue that you cannot solve, please contact your nearest
Arzum Authorized Service.
• Use your device as recommended and fit for the purpose.
Battery Installation
Install four 1,5 volt AAA batteries in the battery section under the
scale.
OPERATING YOUR DEVICE
Normal weighing:
• Ensure that the scale is placed on a firm and flat surface.
• Step on the scale so that your feet are evenly spaced and wait until
the weight is measured without moving.
• The value measured will be displayed on the screen thanks to the
sensitive sensors in a short time.
Overload indicator:
When the scale is overloaded (195 kg and more) the display will show
"EEr".
Low power indicator:
Smartfit scale will give a "Lo" warning on the display
when the battery level reaches a low level.
If you see the "No Display" warning, please change
the battery of your scale.
EN
