Arzum SATEEN TOUCH AR 5020, Instruction Manual

Page: 11 / 17

20 ARZUM
21 ARZUM
PATCH TEST
• 24 hours before treatment check for any reaction by treating a small
area first (Consult the Treatment Level and Times Comparisons Table),
• For initial operaiton, choose a small area on arm, treat the area in each
power level up to the maximum power level for your skin type (repeat
1-2 shots on the same area),
• If there is any redness and swollen, burnt scares, change of hair
follicles, irritation or any other discomfort, do not use the instrument
before a thorough consultation with doctors,
• If no skin abnormity after 24 hours, feel strong hotness, then the
last low level is the most proper energy for your skin. Please do regular
treatments.
PRODUCT INTRODUCTION
Packing
Hair Removal, Skine Tone Test System, Glasses, Adapter, User Manual,
Velvet Pouch
Main Structure
Light Exit Window with Integrated UV Filter
Flash Button
Intensity Lights
Power Light
On-off/POWER Button
Adaptor Input
READY Light
Adaptor
Skin Tone Test Sensor
Treatment Glasses with UV Filter
• In case that the instrument is soaked please power off before
touching the instrument for your safety.
• Avoid keeping it in places where there is a strong magnetic field or
electric wave occured, or places in high temperature.
• Only use on skin, not on any other surface.
LIFE TIME REMINDER SYSTEM
• There is a built-in life time reminder system in device and the total life
time is 200.000 flashes.
• When shots emitted more than 50,000 shots (including 50,000
shots), the indicators of two sides will flash once.
• When turn on the device each time; when
shots emitted more than 100,000 shots (including
100,000 shots), the indicators of two sides will flash
twice when turn on the device each time.
• When shots emitted more than 150,000 shots
(including 150,000 shots), the indicators of two sides
will flash 3 times when turn on the device each time.
SKIN TONE TEST SENSOR
Function: Skin tone test sensor is used to test skin
tone type and offers power level suggestion.
Instruction:
a) Voltage: 3 V d.c; Power; 0,3W
b) Battery inside, no need charging,
c) Use cotton swab or cleaning cloth to clean and disinfect the test
window,
d) Let the test window touch treated areas or the areas with the similar
skin color flatly then press the turn on/off button,
e) The skin type display will show what skin type by indicator,
f) Skin tone test for more than 2 times to make sure test results
accurately,
The skin tone sensor is only applicable for only
Arzum Sateen Touch
.
Once you test your skin type, you can choose suitable energy level
from Treatment Level and Times Comparisons Table for the treatment
area.
EN