18
ARZUM
Installation of battery pack and handheld
vacuum cleaner:
Overturn the handheld vacuum clean to the
back side, push the release buttons of battery
cover to open. Then vertically insert the battery
pack into the battery compartment as shown in
the picture, recover the battery pack after the
installation is properly done and the handheld
vacuum cleaner is then completely assembled.
Installation of handheld vacuum cleaner and
stick Vacuum cleaner:
When installing the handheld vacuum cleaner to the stick vacuum
cleaner, grab the handle of handheld vacuum cleaner, aim it at the air
inlet of stick vacuum cleaner on the motorized turbo head and insert it.
Lastly, rotate and push the handheld vacuum cleaner to the direction
shown in the picture until a “click” locking sound is heard.
Press the handheld release button and remove the handheld vacuum
cleaner when it should be removed or used separately.
Installation of charging dock:
Vertically insert the support of charging dock into its base to the
direction in the picture and push until ‘click’ locking sound is heard and
complete charging dock assembly.
Installation of stick vacuum
cleaner and charging dock:
Slide the stick vacuum cleaner down to the slot
at stand support and place it as shown in the
picture.
USING YOUR APPLIANCE
• NEVER operate your device without a filter.
• Pull upwards your device from the charging
stand to use as a vertical vacuum cleaner.
Operate your appliance by pressing the on/
off button.
