6
ARZUM
7
ARZUM
• The outer surface of your appliance may be hot while operating, so do
not touch hot surfaces, always use handle or on / off button.
• Unplug from outlet when not in use and before cleaning. Allow it to
cool down before cleaning the appliance.
• Use your appliance with its own power base unit only. Do not place it
on power base which belong to the other appliances.
• The kettle will switch off the energy automatically if it is left in operation
while empty or while there is not sufficient water in it by mistake. In this
case allow it to cool down completely before filling with water.
• Protect your hands from spout when the water is boiling, and do not
let children to use the appliance.
• Never switch on the appliance when its lid is open. Never open the lid
while the water is boiling. Always take care to pour boiling water slowly
and carefully without tipping the kettle too fast.
• Before operating the kettle ensure that the lid is fitted correctly,
otherwise your kettle may not switch off automatically.
• Always remove your kettle from its power base
before filling. Ensure that the water level is below
the max mark.
•
Do not
operate your appliance when the water
filter is not placed on the inner side of the spout.
•
NEVER
immerse the appliance, power base unit,
or electric plug in water or other liquids, nor wash
in a washing dish machine, nor use in bathroom or
any other places with a high rate of moisture.
•
NEVER
leave the power base unit and electrical connection ends of
your device in a damp state. If wetted, unplug before drying and no not
operate the appliance before having it dried completely.
• Use your appliance for its intended purposes as recommended.
USING YOUR KETTLE
WARNING: Do not use the kettle for any other purposes other than
boiling water. NEVER fill with any other liquids or solutions.
• Before the first use, wash your kettle with cold water at several times,
then fill with water up to the MAX water level, and then boil the water
until your appliance shuts of automatically. Pour out the water and wash
it with cold water. Repeat this operation for three times and then allow
your appliance to cool down.
EN
• Open the lid of your kettle by pushing the
lid opening lock. Then fill your kettle with water
according to the desired amount and close the
lid. The water level indicator will show you how
much water you have put in the reservoir. Take
care not spill any water to base power unit, so
fill your kettle after removing from the base
unit.
• Fill the kettle with water always between
the levels min. (0.5 lt) and max. (1 lt) marks.
If you try to boil water under the minimum
level, it may cause early switching off the
appliance, and if you try to boil water above
the maximum level, it may cause the water to
overflow.
• Unroll the cable
from the cable
winding section completely. Place the
reservoir on the power base unit. Make sure
that it locates on the power base correctly;
otherwise your kettle could not be switched
on. Plug in the mains plug.
• Press the bottom of the on / off switch to “I”
location and operate your appliance.
• When the water has boiled, your kettle will
automatically switch off, the switch will return
to the off location and the indicator light will go
out.
• If you need to switch your kettle off before
the water boils, please push the on / off switch
from on location to off location.
NOTE: Ensure that your kettle has switched
off automatically, or is switched off manually
and is disconnected, before moving it from
the power base unit.
• Take your kettle carefully from the base unit
and pour boiling water slowly to avoid the risk
of splashing.
