16
ARZUM
17
ARZUM
• Use the time buttons to in) or decrease(-) the time setting and
use the speed buttons to in) or decrease(-) the speed setting
(don't use low speed for blending dense food.)
• Press the on/off button to start the blending
process. During use the speed and the time
setting can be adjusted.
• To interrupt the process you can use the on/off
button.
Pulse button
Use the PULSE button to blend for short times,
press and keep the PULSE button to blend,
release the button to stop.
Preset programs
• When the jar and the lid are installed properly (refer to paragraph “
before the first use”) you can turn on the
Dynamix Power Blender
.
• Now you can choose between 6 different preset blending programs
(Ice, Fruits, Grinding, Soup, Smoothie and Sauce.)
• After you have selected a program, the picture off the selected
program on the display will illuminate, the start speed and remaining time
will be displayed.
• Press the on/off button to start the selected program, press the on/off
button again to interrupt the running program. Note that the complete
blender will turn off when you interrupt the program, after interrupting
you can not continue the program at the point you have interrupt it.
EN
• If all the safety locks are properly placed, a
“beep” sound is heard. Push the on/off button to
run the appliance. Digital screen is enlightened so
as to inform that the appliance is running.
Note: If not interrupted, the appliance will turn
off itself after one minute.
• You can process as you like, by adjusting to
appropriate settings.
NOTE: If you make any addition when the
appliance is in use, turn the cap in the middle
of the blender cover anticlockwise (to the left)
and remove and make your additions from there.
After that replace the cover and turn to the
arrow direction “ LOCK ”.
USE
General
Note: do not add hot liquids or ingredients into the
Dynamix Power Blender.
• Chop all your ingredients into approximately
2-3cm cubes and add to the make sure you keep
the ingredients under the
MAX
mark on the jar.
• Any ingredients to be added during the process
can be added through the refill hole in the center
of the lid. Do not unlock or remove the lid as this
will stop the program.
• Any interruption will result in the cancellation of the program.
Restarting will result in the blending stages being repeated which may
affect the final recipe.
• To completely stop the program at any time, simply press the on/off
button.
Manual operation setting
• When the jar and the lid are installed properly
(refer to paragraph “before the first use”) you can
turn on the. The display will light up, the default
speed setting is “3” and the default time setting is
00.40 minutes.
