AUTOMATIC SAFETY SHUT-OFF
The automatic safety shut-off device will automatically cut the heating
off, when the iron operates without move for a while, and the iron will be
turned off.
Your iron will automatically turn off, if it is left:
- Upright position and base attached approx. 8 minutes, or
- Horizontal position and base attached or sideward for approx. 30 seconds.
AFTER USE
•
Set the variable steam button to the position “ “.
•
Remove the mains plug from the wall socket and wait for the soleplate to
cool down completely.
•
Pour out the water contained in the water tank by shaking it.
SELF-CLEANING
•
The self cleaning system to be used at regular intervals (once or twice a
month) will prolong the life of your iron,and protect it from the formation of lime
and dust particles.
•
Fill the water tank with water to the Max point.
•
Place the iron on a flat surface,in the upright position standing it on its base.
•
Set the temperature switch the position max.
•
Insert the mains plug into the wall socket. Wait until temperature display goes
off and your iron reaches the required temperature.
•
Unplug the iron from wall socket.
•
Hold the iron with its soleplate facing downwards, over a sink or bathtub.
•
Slide the self clean button to the left and keep it at downward position for a
few minutes. Repeat this until the water in the iron finishes.
ATTENTION: While pressing the self-clean button,the boiled water and
steam will come out through the holes under the soleplate,protecting
your appliance against any formation of lime and scale.
•
Move the iron forward and backward until the remaining water in the water
tank is discharged completely.
19
ARZUM
EN
