4
ARZUM
5
ARZUM
•
ALWAYS
unplug your appliance from outlet when not in use and
before putting in or taking off any accessories and before cleaning and
maintenance.
•
NEVER
use your appliance in wet surfaces and outside your home for
vacuuming fluids, such as water etc.
•
CAUTION:
Do not use your appliance for absorbing any flammable
liquids such as gasoline, thinner, alcohol, kerosene, etc., as well as
abrasive liquids (such as acids, etc.) Do not let your appliance absorb
burning cigarettes, active cigarette ashes or matchsticks. Do not
attempt to remove any sharp objects such as glasses, etc.
• Ensure not to move the appliance over its cord, which may damage to
the insulation of the unit. Do not carry your appliance by its cord.
• If you are in doubt that the cord or plug is damaged, or that your
device malfunctions in any manner whatsoever, including dropping
down, etc., never start up your appliance, nor repair it by yourself. Take it
to the nearest
Arzum Authorized Service
immediately.
•
NEVER
use your vacuum cleaner without filters, dust reservoir or dust bag.
• Contact your
Arzum Authorized Service
for examination, repair and
spare parts, and use original spares, accessories and dust bags only.
How to mount / remove the hose:
• Press the buttons on the hose and its fastened nozzle and push
forward them to insert into its socket located in
the hose inlet of the nozzle.
• To remove the hose first disconnect the
mains plug from wall outlet. Press the locking
buttons on the hose nozzle and pull towards
yourself.
How to mount / remove the telescopic tube
and accessories:
• Fit the telescopic tube onto the handle at the
end of the hose. While pressing the grey button
in the direction as shown by the arrow, adjust
the height of the telescopic tube by pushing or
taking out it.
• Install an appropriate accessory onto the end
of the suction tube.
Turbo Brush
• Turbo brush has a rotary brush driven by air
flowing in the nozzle casing. By the rotating
brush the pieces is easily cleaned. The use of
the rotary brush on the turbo head increases
the effectiveness of picking up the fibre-like
impurities from carpets and floor coverings.
• Do not keep the turbo head on the same spot
for longer than necessary while vacuuming. Keep the turbo head moving
across the carpet all the time otherwise you can damage the carpet.
• The brush roll or its suction canal may be blocked with small pieces of
materials, if this happens turn your vacuum cleaner off and remove the
impurities blocking the roll of suction canal.
• NEVER touch while the brush is rotating.
• Regularly cleaning the pieces of threads, strings, hairs etc. is increase
the performance of the turbo head. For cleaning it, firstly turn your
vacuum cleaner off and remove the turbo brush from telescopic tube
and then clean the turbo head.
• To clean the turbo brush of Arzum Cleanart Silence Pro Energy;unlock
the screw which placed under the brush by turning it clockwise. Then
remove the brush by hand and clean the hair that tangled. Than, replace
the brush and lock the screw by turning it counterclockwise.
• Remove the cover
by pressing from
both sides of latches.
Remove the hair which
was wrapped around
wheel. Finally attach
the cover back into it’s
own place by aligning cap to the rails on the sides.
EN