Arzum AR 5059, Instruction Manual

Page: 17 / 24

17 ARZUM
Using Shaver Head
• Place adapter into socket and charge fo 16 hours initially. Charging
takes approximately 90 minutes. The appliance can be used up to 60
minutes after it is charged. Your appliance starts charging when charge
indicator light turns red.
Warning:
• While using shaver head, turn off the device after 15 min usage for a
few minutes break.
•
Charge indicator light will blink at a one-second interval to indicate
charge level is low.
• Your unit cannot be turned ON if the cord is plugged into the unit but
not into the electrical outlet.
• Turn your appliance to off “0” position.
• Unplug the unit from electric outlet.
•
Gently remove the depilation head from the
unit by pressing the release button on the side
of the unit.
•
Attach the shaver head and slightly pres until it
clicks into place.
Attention:
•
When placing the shaver head into the unit, make sure that the teethed
wheel on the unit and the teethed wheel on the shaving attachment line
up.
• Remove the protective cover on the head.
• The shaver head should only be used at the High Speed “2” setting.
•
Hold your appliance so that it is vertical against your skin, at a 90°
angle (in the upright position). This allows the shaver to trap the hair
through the holes of its metal protection cover and smooth away any
stubble.
• To ensure more speedy and effective shave with special shaving
attachment trim hairs that are longer than 10mm, before using your unit.
EN