6
ARZUM
7
ARZUM
•
NEVER
touch while the brush is rotating.
• Regularly cleaning the pieces of threads, strings, hairs etc. is increase
the performance of the turbo head. For cleaning it, firstly turn your
vacuum cleaner off and remove the turbo brush from telescopic tube
and then clean the turbo head.
Carpet and Floor Brush Adjustable
According To Surface:
It is used for dry cleaning of both hard and
soft surfaces. You can clean the hard surfaces
with the brush placed outside, and the soft
surfaces, such as carpets, etc. with the brush
placed inside. Ensure inserting or removing the
brush by pressing the button on the brush.
Tube with Narrow Nozzle:
• It is used for cleaning of especially unapproachable
areas such as armchair corners, radiator intervals, wall
borders and corners etc. narrow areas.
Cleaning Nozzle
• In places where the narrow nozzle is not convenient
to use, this part is used (for cleaning upholstery,
cloths, beds, etc.)
Small Brush
• By attaching this part to the small brush, you can
clean furniture, lamps, shelves, books, etc.
Mechanical Suctioning Power
Adjustment:
Using the air adjustment button located on the hose
handle makes it easier for you to clean tulles, curtains,
etc.
USING YOUR APPLIANCE
CAUTION: Before using your appliance, make sure that filters and dust
reservoir are attached.
• Before using your appliance extend
its mains cable to the proper length and
plug in the wall socket. After the yellow
tape appears on the cord, the cord is in
the most suitable length for use. When
red tape appears, NEVER force too
much to pull out the cord.
• Operate your appliance by pressing
on/off switch on the main body.
• Press on/off switch again in order to finish the cleaning process.
• After unplugging, press the cord rewinding button on the main body
and then collect the cord.
CLEANING AND CARE
• Always turn off your appliance and unplug your mains cable from the
wall socket before attempting any maintenance and care process.
• Clean body and interior section of your appliance with a wet cloth and
then make sure that they are dried. Do not use abrasive substances or
chemical solvents for cleaning your vacuum cleaner.
Removing and Emptying the Dust Reservoir
• In order to remove the
dust reservoir, firstly
eject the hose from hose
inlet. By pushing the dust
reservoir removal button,
take the reservoir out.
• Ensure to open the cover
by pressing cover locking button (PUSH) under the
dust reservoir in order to empty any dust. Empty
the reservoir.
• Make sure that cover is closed
completely for further use.
• To wash the dust bin, switch
the multi cyclone unit to
position and pull it up.
EN
