17
ARZUM
sediment may form due to the hardness of the water. This is quite natural
and has no adverse effects whatsoever on human health.
• With the ON/OFF switch turned on “I”, the lid of the kettle MUST be closed.
• Turn the main switch (on/off switch) to the position “I“. Indicator light will
turn on and the water will begin to get warm. When the water reaches
boiling the kettle will switch off automatically and the main switch will spring
back to the original position.
• If you desire to stop the boiling function you can turn the main switch
(on/off switch) to the position “0”.
• When filling the kettle with water,
ALWAYS
remove the appliance from its
power base unit. By doing so, you can prevent the water from pouring on
the table.
• Do not fill with less than 0.5 liter of water (less than “MIN” indication) or
more than 1,7 liter of water (more than “MAX”
indication).
If you attempt to boil a quantity of water below
the minimum level or above the maximum level,
the appliance may switch off rather early or
the boiling water may eject from the spout,
respectively.
• When not in use, provided that the main switch
is turned off “O”, it would be convenient to allow
the appliance to stay continuously plugged in the
kitchen.
SWITCHING ON AGAIN
• If you want to re-boil the water make sure that your appliance has
cooled down sufficiently. Should the on/off switch turn to the position “0”
automatically, do not force it to the position “I”. Otherwise, you may damage
to your appliance.
SECURITY SYSTEM
• After the water has boiled, the appliance switches off automatically off.
• Protection against operation without water: If your device accidentally
is put into operation, then the fuse turns against operation without water
and thereby the energy becomes automatic switched off. In such a case,
take the plug of yours remove the device from the socket or from the
mains and wait until it has cooled down completely.
EN