1. Power the device.
2. Direct Mode: If you don’t have router, please choose direct mode, then you
can play your music from your storage from 4STREAM app .
3.Network Mode : Connect your phone to SoundSystem WiFi.
3.1. Go for mobile device WLAN settings> Connect
mobile device to WiFi hotspot SoundSystem_xxxx you will see a WiFi logo
.
(short press the reset button if the Wi-Fi hotspot is not found)
3.2. Open the 4STREAM application, follow the guides
3.3 Choose the 2.4G network( first time connection require connect your router
2.4G channel), enter router password>wait for the device to be configured.
* For multiple units connecting to same router, router password will be saved .
*If change router or router password, please press WiFi reset button on the
product .
6. Specification
5.1 App download
Download the 4STREAM application from App Store for iOS based devices and Google Play Store for
Android based devices.
The application supports English, Spanish, French, German, Italian, Portugese, Korean, Simplified
Chinese,Traditional Chinese and Japanese
5. How To Use
Connectivity
Wireless network IEEE802.11 b/g/n 2.4G
Ethernet
Single 10/100M RJ45
Bluetooth
5.0, SBS/AAC
USB Host
Play USB music
Bluetooth Distance
10M
Power Input
DC 12V - 26V
Audio Input
Analog 3.5mm/4pin connector/Micro USB
Audio output
Analog Speaker out
(PIN SPACE-5.0mm)
Frequency response
20Hz to 20kHz
Speaker Power
2×50-W into a 4-Ω BTL Load at 21 V
2×30-W into a 8-Ω BTL Load at 24 V
2×15-W into a 8-Ω BTL Load at 15 V
THD+N
0.03%, @1kHz 50W+50W 24V-4Ω
Speaker Impedance 4-8ohms
Music Format
FLAC/MP3/AAC/AAC+/ALAC/APE/WAV
Decoding
Up to 24bit/192kHz
Protocols
AirPlay, DLNA, UPnP, Spotify Connect, Qplay
Dimensions
110*80*22m
IR Remote Controller Optional
Scan the QR codes below for more
www.arylic.com
Complete User Manual
Support: [email protected]
4STREAM App
:
arylicme
YouTube:Arylic
4STREAM
5.3 Connection via LAN
Plug in the wired cable to the RJ45 Ethernet, the device will show on the app in about 10 seconds. (Note: the cell phone and the device must
be in the same network)
The application will notify you in app when there is a
new firmware version available.It's recommended to
update firmware whenever available as this might not
only correct bugs or improve security,but also can add
new features or services.
5.7 Firmware update
Power up and connect the Up2Stream AMP to your PC with USB cable (make sure it’s a data cable
including the signal wires). The PC will automatically discover a USB sound card, and when you
activated it as the system main output, the PC will send the audio output over Up2Stream AMP in
digital (44.1KHz/16bits).
You can stream to other Up2Stream devices over multiroom connection.
NOTE: there’s about 3 seconds delay for multiroom slave devices.
5.5 USB audio
To use bluetooth ,please swtich to bluetooth via
app or by remote controller,then find bluetooth
device SoundSystem_XXXX from your phone
bluetooth setting and pair it .
5.4 Bluetooth
Connect the Up2Stream device to your PC with USB cable (make sure it’s a data cable including the signal wires). And open the program
Up2Stream DSP Tool (only support Windows.), and you can tune audio effects conveniently, including Music Noise Suppressor, Virtual
Bass, Stereo Widener, Exciter, 10 bands EQ, etc. After editing the audio effects, you can save the changes to the device so the tuned
effects will remain. You can get more information from our website
www.arylic.com
，
or from the Up2Stream DSP Tool manual.
5.6 Up2Stream DSP Audio Effects Tool (
Sell Separately
)
5.2 Connection
*Attention for Android users
Different brand mobile phones may ask you to allow
to use SoundSystem WiFi network, please choose
yes, if not, you may not able to set up successfully .
It may also ask you to authorize other things, please
choose yes or it may affect your use.
