ZA5.1 Surround Amplifier Owner's Manual world v 1.6 CE ©2003 ARX®
ZA5.1 Surround Amplifier Owner's Manual world v 1.6 CE ©2003 ARX®
Specifications
Power Output :
Channels 1 - 5 @ 8 ohms:
75 w RMS
Channels 1 - 5 @ 4 ohms:
100 w RMS
Sub Channel @ 8 ohms:
180 w RMS
Sub Channel @ 4 ohms:
250 w RMS
Distortion:
1 Watt @8 ohms, 1 KHz
.01%
Channel Separation:
@ 1KHz
-88dB
@ 10KHz
-80dB
Front panel indicators:
Clip LED:
yes
Protection LED:
yes
Weight:
Kg
14
Lbs
30
Size
2 RU High (89 mm)
19” Wide (482 mm)
16” Deep (400 mm)*
Input sensitivity:
for
rated output 8 ohms:
.775V
Frequency response:
@ rated output:
20Hz - 20KHz ±4dB
CMRR
>70dB @ 1 KHz
Input Impedance:
40 Kohms Balanced
Input Connectors:
Jack
Output Connectors:
Neutrik Speakon
Construction
All steel monocoque
2
7
This symbol indicates that a Slow Blow fuse is used in this equipment. Replace with same
type and value only
This symbol is intended to alert you to the presence of uninsulated dangerous voltage within
the product's enclosure that may be of sufficient magnitude to constitute a risk of electric
shock.
This symbol is intended to alert you to the presence of important operating instructions
contained in this owner's manual
WARNING SYMBOLS USED ON THIS EQUIPMENT
IMPORTANT -
This amplifier is designed to be
connected ONLY to the AC voltage ticked below
100 V AC, 50 - 60 Hz
120 V AC, 50 - 60 Hz
220-240 V AC, 50 - 60 Hz
240 V AC, 50 - 60 Hz
!
It is essential that you check that
this voltage is correct for your
area before connecting it to AC
power. Do not plug power cable
into AC power until voltage has
been checked. If incorrect, contact
your ARX distributor.
Your warranty does not cover
connecting the amplifier to the
wrong voltage AC power!
* Add 30mm to depth behind front panel to allow for rear rack mount
ears and handles; add 30mm to depth before front panel to allow for
handles and volume controls (if fitted)
Complies with 89/336/EEC EMC Directive, amended
by 92/31/EEC and 93/68/EEC and meets the following
standards:EN 55013 : 1990, Sections 3.2 and 3.5 EN
55020 : 1988, Sections 4.3, 5.4, 6.2, 7.0, 8.0.
Complies with Australian Standard AS/N25 1053
This model has a removable AC power lead that connects to an
IEC connector (See Picture at Left)
