MaxiMIX Owner's Manual v 3.0 CE ©2010 ARX®
MaxiMIX Owner's Manual v 3.0 CE ©2010 ARX®
6
3
For the Installation Contractor, accurately mixing line level audio signals has never been easy.
Using the wrong product can lead to lack of headroom, vastly differing input levels, uneven
output levels, RF breakthrough - the problems have been seemingly endless.
Until now, that is!
Introducing the MaxiMix from ARX: Two independent mixdown groups, each consisting of 4
line inputs with individual level controls and RF filters.
Each input has up to +6dB of gain available, and full attenuation to allow matching of any line
level signals.
Each of the 4 electronically balanced inputs combine into fully balanced Master outputs, each
of which has 2 male XLR sockets.
Internally, careful attention to signal path design has resulted in a unit with wide dynamic
range, enough headroom to cope with the hottest line signal, and better than digital noise
specifications
AC power range is a universal 100 to 120V or 220 to 240V AC, and is connected to the unit
via a standard IEC connector, with built-in fuse and voltage change switch.
Accurate and compact, the MaxiMix's unique combination of ultra low distortion, low noise and
high headroom makes it the ideal installation line mixer.
Introduction
Thank you for choosing this ARX MaxiMIX Dual Channel Line Mixer. We hope you enjoy using
it as much as we enjoyed creating it. As with all ARX equipment, it has undergone extensive
factory calibration and ‘burn in’ before shipping. To ensure continued trouble free use, please
familiarise yourself with the contents of this manual before using the MaxiMIX.
About the MaxiMIX
Applications
A typical MaxiMix application would be as an Installation Master Mixer, combining Live Band
Mix, Disco, KTV and Audio-for-Video signals to run independently of each other through the
one speaker system.
Other applications include line sub-mixer for external effects units, and Keyboard, Drum
machines or other Electronic Instruments sub-mixer.
The controls on the front panel correspond to the input connectors on the back, and adjust
the mix output levels as required
EXTRA MIX B
OUTPUT
EXTRA MIX A
OUTPUT
INPUTS A 1 TO 4
MIX B
OUTPUT
INPUTS B 1 TO 4
AC POWER
INLET AND
FUSE
EXTRA MIX A
OUTPUT
MIX A
OUTPUT
INPUTS A 1 TO 4
NOT
USED
INPUTS A 5 TO 8
AC POWER
INLET AND
FUSE
Single Channel mode
Dual Channel mode
SWITCH
IN
SWITCH
OUT
MIX A
OUTPUT
