iSwitch SUB Manual v1.5
©2012
ARX Systems Pty Lt
d
®
iSwitch SUB Manual v1.5
©2012
ARX Systems Pty Lt
d
®
5
4
Front Panel
Rear Panel
• IEC 3 pin AC connector and integral fuseholder.
Replace fuse with correct
value only: 100 - 120 V AC 1 amp, 220-240 V AC 0.5 amp. Please also refer to
voltage details on Page 2
• Jack Output Connectors.
24 (2 per channel) ¼” TRS (TipRingSleeve) balanced
output jacks. Wired Tip +, Ring –, Sleeve Ground
• Mute
A
LL
global mute button mutes signal on all outputs
• Mini-jack connector
for mp3/portable media players. Signal input
s to
Input
A
• Channel
A
or B
input switches and status LEDs
• Sub Level control,
variable from infinity to +6dB
• 4 x
Numbered
SUB Marker Panels.
A
‘scribble-strip’
for writing down
SUB channel assigns
• 4 x SUB Output
switches and status LEDs
• Channel
A
Level control, variable from infinity to +6dB
• Channel B
Level control, variable from infinity to +6dB
• 12 x S
tereo Output
switches and status LEDs
• 12 x Numbered Marker Panels.
A
‘scribble-strip’
for writing
down channel assigns
• SUB Jack Output Connectors.
8 (2 per channel) ¼” TRS (TipRingSleeve)
balanced output jacks. Wired Tip +, Ring –, Sleeve Ground
•
Channel A and B
Input Jacks with associated Loop Outputs for connecting to
other equipment or another
i-switch
or
i-switch SUB
