background image

CentreMIXX Owner’s Manual V1 © 2002 ARX Systems®

CentreMIXX Owner’s Manual V1 © 2002 ARX Systems®

7

Complete online documentation is available on the ARX website:

www.arx.com.au/centremixx.htm

Specific queries can be emailed to the factory at 

[email protected]

2

This symbol indicates that a Slow Blow fuse is used in this equipment. Replace
with same type and value only

This symbol is intended to alert you to the presence of uninsulated dangerous
voltage within the product's enclosure that may be of sufficient magnitude to
constitute a risk of electric shock.

This symbol is intended to alert you to the presence of important operating
instructions contained in this owner's manual

WARNING SYMBOLS USED ON THIS EQUIPMENT

IMPORTANT 

- PLEASE READ THIS FIRST

This is a dual voltage unit. It is essential that you check that the voltage on the fuseholder

cover below the AC connector on the rear of the chassis is set correctly before connecting it

to AC power.

To change, pull fuseholder out and rotate 180

o

, then push in again. Do not insert power

cable into unit until voltage has been correctly set. Do not plug power cable into AC power
until voltage has been correctly set

THIS IS SET FOR 100 V

AC TO 120 V AC

OPERATION

THIS IS SET FOR 220 V

AC TO 240 V AC

OPERATION

Complies with 89/336/EEC EMC Directive, amend-

ed by 92/31/EEC and 93/68/EEC; CE 73/23/EEC

Low Voltage directive and meets the following

standards:EN 55013 : 1990, Sections 3.2 and 3.5

EN 55020 : 1988, Sections 4.3, 5.4, 6.2, 7.0, 8.0.
Complies with Australian Standard AS/N25 1053

CentreMIXX

Specifications

Input Impedance (all inputs)

44 KOhm Balanced

22 KOhm Unbalanced

Input Headroom

+24dB

Max Output Level (all outputs)

+24dB

Output Noise (all outputs)

–96 dB Unweighted

Output Impedance

200 Ohm Balanced

100 Ohm Unbalanced

Dynamic Range

120 dB

Frequency Response

10Hz – 20KHz ±0.5 dB

Distortion 

@ Unity Gain

100 Hz .0035%

1 KHz .0032%

10 KHz .0037%

Input Connectors

Balanced Female XLR

Output Connectors

Balanced Male XLR

Unit Gain

Left and Right Channels Unity

Centre Out

M10 dB relative to
Left and Right Inputs

Centre Level Control

Detented from Infinity through to +10 dB

Aux Input Level Control

+10dB

Aux Input Phase

Switchable 0/180º

Power Requirements

100/120 V AC or

220/240 V AC

Weight

5 lbs/2.2 Kg

Dimensions

19"W x 1¾"H x 6"D
482 x 44 x 155mm

Our policy is one of continuous improvement, and therefore designs may change

without notice. However, unless otherwise stated, specifications will always equal or

exceed those previously given. ARX® is a Registered Trade Mark of ARX Systems Pty

Ltd. BarMIX™ is a trade mark or ARX Systems Pty Ltd. Any other names and

trademarks are used for information purposes only, and no other intent is expressed

or implied

Reviews: