![Arx Valdex 35833102 Manual Download Page 16](http://html1.mh-extra.com/html/arx-valdex/35833102/35833102_manual_2979619016.webp)
16
Technical Reference Booklet
The password requirement is defined by the Security Option of the BIOS Features
Setup Menu. If the Security Option is set to “System”, the password will be required
both at resetting and at entering setup . If the option is set to “Setup”, the prompt only
appears when you try to enter setup.
Power Management Setup
The Power Management Setup Menu allows you to configure you system save most
energy while operating in a manner consistent with your own style of computer use .
PNP/PCI Configuration Setup
This section describes how to configure the PCI bus system. This section covers some
very technical items and it is recommended that only experienced users should make
any changes to the default settings.
Flash Update Procedure
A program AWDFLASH.EXE is included in the utility diskette. The user is recommended
to follow the procedure below to update the flash BIOS.
1.
Create a DOS-bootable floppy diskette. Copy the new BIOS file (just obtained or
downloaded) and the utility program AWDFLASH.EXE to the diskette.
2.
Allow the PC system to boot from the DOS diskette.
3.
At the DOS prompt, key in
AWDFLASH
and hit <ENTER>
4.
Enter the file name of the new BIOS.
5.
The question: “Do you want to save file?” is displayed.
Key in “N” if there is no need to save the existing BIOS content..
Key in “Y” if a backup copy of the existing BIOS is needed.
(A file name has to be assigned to the existing BIOS binary file.)
6.
The question : “Are you sure to program?” is displayed.
Key in “Y”
7.
Wait until the flash-update is completed.
8.
Power down the PC system.
9.
Restart the PC.