8
Aruba Instant On AP12 Access Point
| Installation Guide
Figure 9
Attaching the Mount Bracket to a Solid Surface
2. Attach the AP to the secured mount bracket as shown in
a. Align the AP with the mount bracket, placing the AP so that it’s mounting tabs are at an angle of
approximately 30 degrees to the mount bracket.
3. Pushing towards the solid surface, rotate the AP clockwise until it clicks into place (see
Figure 10
Attaching the AP to the Mount Bracket
AP-to-Bracket Option
1. Place the mount bracket against the back of the AP with the bracket at an angle of approximately 30 degrees
).
This mounting option works only with a wall.
