6
IAP-270 Series Outdoor Access Point
| Installation Guide
1. Power off the AP.
2. Press and hold the reset button using a small, narrow object, such as a paperclip.
3. Power-on the AP without releasing the reset button. The system LED will flash within 5 seconds.
4. Release the reset button.
The system LED will flash again within 15 seconds indicating that the reset is completed. The AP will now
continue to boot with the factory default settings.
AC Power Interface
The IAP-270 Series is capable of AC power in the range of 100 - 240 VAC. The power cord or power
connector kit is sold separately.
Grounding Point
Always remember to protect the AP by installing grounding lines. The ground connection must be complete
before connecting power to the AP enclosure.
Figure 6
IAP-274 and IAP-275 Top View
At the top of the IAP-270 Series, the solar shield with the mounting holder is fixed onto the AP before
shipping from the factory.
Figure 7
IAP-274 Bottom View
Solar Shield
Mounting Holder
With Aesthetic
Cover
Aesthetic
Cover Removed
