2
AP-MNT-MP10-X Mount Kit | Installation Guide
3. Release the spring loaded slider so it slides back to its original position and holds the new mount in place.
4. Use a #1 Phillips Head screwdriver to tighten the security screw on the existing mount.
Figure 3
Tighten Security Screw
5. If needed, route and tie wrap Ethernet cables to cable lances.
6. Plug Ethernet connector(s) into port E0/E1 on the back of the AP.
7. Slide the AP-5xx onto the rail and use the included hook tool to pull the lock ring out.
Figure 4
Pull Lock Ring Out
8. Slide the AP bracket fully into place and release the lock ring.
Figure 5
Slide AP into Place
9. Use a #1 Phillips head screwdriver to tighten the screw securing the AP to the metal mount bracket.
1
2
1